The three terminal locations
The supply plant terminal entries are a series of entries found on terminals in the supply plant in the Fallout 3 add-on The Pitt.
Turret control system
Note: There are two of these wall terminals in the plant, both with an Average-difficulty lock. The first is located in a raised office pod, next to a skeleton hanging out of a window. The second is located next to a broken protectron, near the exit to the Pitt steelyard.
-RobCo Trespasser Management System-
------------------------------------
Re-configure Targeting Parameters
> Target Data cleared. Exercise Caution.
Activate Turret System
<!>WARNING: No Targeting Data<!>
> <!>Please Exercise Caution<!>
>Deactivate Turret System
> Powering Down...
>System Information
RebcOS v.85 (C)2076 RobCo ======================== | User Log: | >> Administrator (RobcoID 2398-H) | >> Default Targeting_Param: | >>> RobcoIndustrial_userGroup ========================
Terminal
Note: There are two of these wall terminals in the supply plant. The first is in the room down the hall from the exit to the Pitt steelyard, above some pencils. The second is attached to a large console, on a raised catwalk, between two industrial machines.
Regarding New Protectrons
There have been several complaints in the past couple of weeks regarding the new Factory Protectrons installed throughout the plant. Some of you feel this is the first step in the long process of phasing out the human aspect of the plant. Please be assured that this is not our intention. The new Protectrons are here only to protect you, the workers. Also, please remember to carry your ID with you at all times. The Protectrons are programmed to make sure those present in the plant are valid employees.
- Management
Regarding Recent Employees
Those employees who recently took it upon themselves to incapacitate a Protectron with a bucket of water and sledgehammer have been dealt with and no longer work at the plant. Let this be a reminder to all employees. Those caught harassing and/or damaging the Factory Protectrons will be dealt with swiftly and severely.
- Management
Regarding New Shipment
We've ordered three new Protectrons to be installed immediately in the plant. One will take the place of the recent Protectron that was destroyed by our very own employees, who, let me remind you, are now ex-employees. The other two will take their positions working on the assembly line.
- Management
Automated maintenence
Note: This wall terminal is located next to a protectron pod, down the hall from the supply closet and near a shelf with several first aid boxes. It has an Average-difficulty lock.
RobCo Service Terminal
V 6.0.3.2.1.a
------------------------------------
For More Top Of The Line
RobCo Products See
Your Local Showroom.
Run Maintenance Routine
> ...Loading Sequence
Run Maintenance Routine
> <ERROR> Maintenance In Progress
Terminal
Note: This desk terminal is located on a table in a supply closet. The same room has four steel ingots and a skeleton.
Regarding New Protectrons
There have been several complaints in the past couple of weeks regarding the new Factory Protectrons installed throughout the plant. Some of you feel this is the first step in the long process of phasing out the human aspect of the plant. Please be assured that this is not our intention. The new Protectrons are here only to protect you, the workers. Also, please remember to carry your ID with you at all times. The Protectrons are programmed to make sure those present in the plant are valid employees.
- Management
Regarding Recent Employees
Those employees who recently took it upon themselves to incapacitate a Protectron with a bucket of water and sledgehammer have been dealt with and no longer work at the plant. Let this be a reminder to all employees. Those caught harassing and/or damaging the Factory Protectrons will be dealt with swiftly and severely.
- Management
Regarding New Shipment
We've ordered three new Protectrons to be installed immediately in the plant. One will take the place of the recent Protectron that was destroyed by our very own employees, who, let me remind you, are now ex-employees. The other two will take their positions working on the assembly line.
- Management
Private Entry #1
I brought it up with Management today that the men down at the plant aren't taking the new shipment of robots lightly. They fear losing their jobs and I don't blame them. It's my job to make sure morale stays high no matter what happens. It's hard to look each man in the eye and tell him that he has nothing to worry about even though I very well know he'll be unemployed in less than a month. I don't know how long I can continue to lie to these men.
Tom McMullin
Supply Plant Supervisor
Private Entry #2
I've managed to delay a rather large shipment of Protectrons today. I told management that we've been having problems with the previous batch of robots and are not prepared for another batch anytime soon. This is complete bullshit of course, the robots work perfectly. They outperform our best worker by a factor of five. The men continue to lose morale day after day. Some blame me, but they don't understand that this is completely out of my hands. I am doing everything I can to help these men keep their jobs.
Tom McMullin
Supply Plant Supervisor
Private Entry #3
Management made a surprise visit to the plant today. I guess they stopped believing what I've been telling them about the robots not performing to standards. They saw first hand the speed and efficiency of the robots. Unfortunately, they also caught two employees in the act of tearing apart a Protectron and smashing it with a sledgehammer. I was to blame of course. The men are starting to believe I'm working closely with the managers and helping them in every way possible to save my own skin.
Tom McMullin
Supply Plant Supervisor
Private Entry #4
News broke out today over the loud speakers that everyone needs to vacate the plant by 1 PM. "Due to budget cuts, this plant is shutting down." The men knew at once there was no budget cut. They ultimately decided I was to blame, having seniority in this section of the plant. As soon as I heard the news, I grabbed my pistol and made for the exit. It was quickly barricaded. I turned around and ran into this utility closet and locked the door behind me. I'll stay in here until the men go home.
Tom McMullin
Supply Plant Supervisor
Private Entry #5
The men won't leave. They're determined to wait until I come out. Probably going to give me one hell of a beating, that I'm sure of. I wish they understood how hard I worked for them, how I used every opportunity to delay the inevitable. They better get going though, it's almost 1 PM. The robots will be here in a half hour, sooner if management hears of what's happening.
Tom McMullin
Supply Plant Supervisor
Private Entry #6
I begged them to leave before the robots got here. They laughed and said they'd take care of the robots, it's me they wanted. Then came the familiar rattle of a Protectron. That got their attention. I soon heard laughter, cursing, and screaming down the hall. I opened the door and stepped outside. A couple of the workers burst around the corner screaming for help. A red laser lashed out from down the hall and severed Tim's right arm in two. I panicked and ran back into the closet and shut the door. The men slammed into the door and begged me to open it. I didn't say a word, just sat stunned, listening to their screams of agony as the robot finished them off one by one. Then silence. I put my ear to the door and listened. I heard the clanking of Protectron feet down the hall. I grabbed my pistol and backed away from the door. No way am I opening this door for anyone or anything! Whoever reads this, let it be known that I did everything in my power to keep everyone's job at the plant. And let this be an example of how not to replace humans with machines.
Tom McMullin
Supply Plant Supervisor
Cut entry
 | The following is based on Fallout 3 cut content. |
|---|
In response to the increased number of Protectron related injuries, I've placed a bunch of generic employee IDs next to the Factory Protectron Pod. The thing doesn't know the difference anyway so, please, if you've forgot your ID, just use the ones on the table. Remember to return them before you leave for the day, I only have so many.
- Management
| End of information based on Fallout 3 cut content |
|---|